Master Triple Carburetor Linkage set up instructions

[Mark Maras]

3 hours ago, siteunseen said:

Do these Zs jump around for anybody else or are my eyes bad?

     

 I'd wait to see the Doc. They're probably just flashbacks.

[hatepotholez]

lol what just happened?

[240260280]

Bumpy Drive?

[hatepotholez]

lol. ok so ordered the 280z linkage, i’ll try it out next weekend. 

[240260280]

Here is an application of the 280z linkage.

The shepherd's hook fits in a slot in the receiver. It can expand and contract.  You can cut it to length and the end is hidden in the receiver.

Sometimes you need to screw the heim joints up so that the throttle rod across the manifold is aligned with the shepherd's hook (in the photo below it looks too low)

Sometimes you also have to relocate where the bracket bolts to the firewall for left/right alignment.

The angle of the arm on the receiver looks nice below. You can loosen all 3 lever push arms so that the main throttle rod across the manifold can be rotated to achieve this.

 

Attention to details helps!

 

 

 

 

Edited February 5, 2019 by 240260280