Thanks for the input guys, both my 71's have black and my 72 has a black also.

I can do them in Red also, so I will make up a batch of Red.

Thanks again for input on these parts.

Steve.

Right Dan,

I can attest to the early ones being in red rubber as well.

All of the early cars I have parted or purchased have had them---usually in very poor condition.

A red alternative would be a nice touch!

Jim D.

"Zup"

Steve, if you need an accurate color match, I may have an

oLd red insulator that you can borrow. let me know.

Dan

Radio knobs, I am working on getting a price for the chrome knob plating.

Edited October 31, 201311 yr by nix240z

early 70-71 choke cable grommet in the straight original version.

Reproduction 72-73 Am/FM radio face plate, I am also working on the clear part.

Reproduction Radio knobs also done.

Steve, if you need an accurate color match, I may have an

oLd red insulator that you can borrow. let me know.

Dan

This is the best color match that I could get for the early 70's series 1 Redish/orange color brake booster check valve.

I have 9 heater control knobs and every single one is cracked.

Now I have reproduced the early style heater control knobs.

This is the best color match that I could get for the early 70's series 1 Redish/orange color brake booster check valve.

[ATTACH=CONFIG]68033[/ATTACH]

Steve, its hard to see the actual color match, but I'm sure it is very close. Looking forward to actually have the opportunity to purchase some

of your very nice looking efforts.

Dan

Now available are the Early 70 series 1 hood bumpers...

Replace that missing or worn out clutch pedal stopper with a new reproduction....

Perfect timing Steve!

I'd been meaning to ask for this piece for a while and you've already done it!

The list of pieces on my order to you grows larger.

I've sent a PM to several members to drum up interest for the door latch rubber and wiper linkage boot reproductions I inquired about to you. (attached)

Please keep up the great work you are doing reproducing the bits and pieces that have no replacement part number or source!

Jim D.

"Zup"

Perfect timing Steve!

I'd been meaning to ask for this piece for a while and you've already done it!

The list of pieces on my order to you grows larger.

I've sent a PM to several members to drum up interest for the door latch rubber and wiper linkage boot reproductions I inquired about to you. (attached)

Please keep up the great work you are doing reproducing the bits and pieces that have no replacement part number or source!

Jim D.

"Zup"

wiper linkage boot is on my list for sure...

Steve