on a side note I would like to thank Norm at www.zeddsaver.com for plating my right and left door window frames.

These turned out looking like brand new frames.

 

 

 

do you need the black ones? 240z have clear

Either one would be ok

I just received the brake and fuel line insulator kit and I must report that the quality of the insulators is absolutely top notch!!

 

Thanks Steve!

Hey Steve you have an updated list of parts that your currently making? I don't wanna go back through all the pages in the thread. 

www.240zrubberparts.com

 

Have you checked his site. I believe it will be fairly up to date, knowing Steve...

A few new items I have been working on.

 

70-71 ashtray lid

 

seat adjuster lever knob

 

battery cover

Very nice...

few more small misc items I have been working on.

might not be a big demand for these but I needed them for my restoration so I am making these small items available.

 

Plus I am working on the lower Quarter window seals and these should be done soon.

 

u-bolt clamp rubber for steering rack

 

brake master cylinder bleed screw caps

New lower quarter window seals. 

 

 

240z rubber antenna base seal on quarter panel.

 

 

 

 

 

Edited December 13, 20159 yr by nix240z

Correct battery frame fire wall rubber insulator. There is a variation of this out there which is slightly different. If you want factory correct part then this is it.

 

The part number is 24480-e4600 NLA

 

 

Steve

It has been awhile since I added a new item, since I just about have every part made. I now have the 70-71 rear brake cylinder rubber kit completed. You will need to reuse your retaining clip.