Spring question

[nismospek]

I had some Eibachs installed today and after I got it back, I noticed that one of the rear springs was installed upside down. The lettering is upside down, luckily the rears were installed in the right place. I wanted to see if I should make a big deal about it. Is there any difference. Figured if it fit, it will probably be same either way. From what I can see, the top part, the notch lines up with the end of the spring.

Edited April 25, 2013 by nismospek

[John Coffey]

The suspension doesn't care what the spring orientation is.

[nismospek]

Thanks for the info. Well that completes my suspension mods, now on to wiring.