I had some Eibachs installed today and after I got it back, I noticed that one of the rear springs was installed upside down. The lettering is upside down, luckily the rears were installed in the right place. I wanted to see if I should make a big deal about it. Is there any difference. Figured if it fit, it will probably be same either way. From what I can see, the top part, the notch lines up with the end of the spring.

Edited April 25, 201311 yr by nismospek

The suspension doesn't care what the spring orientation is.

Thanks for the info. Well that completes my suspension mods, now on to wiring.