cbuczesk Posted January 23, 2018 Share #37 Posted January 23, 2018 I have that rubber part too.ChuckSent from my [device_name] using http://Classic Zcar Club mobile Link to comment Share on other sites More sharing options...
nix240z Posted January 23, 2018 Share #38 Posted January 23, 2018 1 hour ago, cbuczesk said: I have that rubber part too. Chuck I have a good sample.... 3 hours ago, cbuczesk said: I found a really nice one. It's still very soft. Chuck This is the one I don't have a great sample of. The one I have has a few groove marks on the underside from the grounding ring. Link to comment Share on other sites More sharing options...
JLPurcell Posted January 23, 2018 Author Share #39 Posted January 23, 2018 (edited) If the mast could be reproduced with the correct tip it would be a no-brainer to have at the very least 100 reproduced. What is the cost per unit? I had forgotten about the seal ring under the retainer. I hope that along with the cap Nix can reproduce this part. With the mast and the rubber parts correct restoration of an antenna for the early Z will be possible. Edited January 23, 2018 by JLPurcell 2 Link to comment Share on other sites More sharing options...
cbuczesk Posted January 23, 2018 Share #40 Posted January 23, 2018 Steve - I'll send you the rubber part from my picture. Is there anything else needed for the antenna? Chuck Link to comment Share on other sites More sharing options...
drpchuynh Posted January 23, 2018 Share #41 Posted January 23, 2018 I would be interested in a few. Sent from my [device_name] using http://Classic Zcar Club mobile Link to comment Share on other sites More sharing options...
Galaxybj Posted January 23, 2018 Share #42 Posted January 23, 2018 Same hereSent from my [device_name] using http://Classic Zcar Club mobile Link to comment Share on other sites More sharing options...
Mike B Posted January 23, 2018 Share #43 Posted January 23, 2018 I'd also be interested in several sets.Sent from my [device_name] using http://Classic Zcar Club mobile Link to comment Share on other sites More sharing options...
ajmcforester Posted January 23, 2018 Share #44 Posted January 23, 2018 For the mast, the tip and how the cord attaches on top are the only different things. The tip will fit the reproduction mast. The upper rubber and chrome cap seem hard to find in good condition. Beyond my discription I posted on replacing the cord and rebuilding the motorSent from my [device_name] using http://Classic Zcar Club mobile Link to comment Share on other sites More sharing options...
nix240z Posted January 24, 2018 Share #45 Posted January 24, 2018 I worked my magic and have these ready to reproduce. One is plastic and the other is rubber plus the small finisher nut rubber seal. Should be about a week before I get some samples ready. I will update once I get them finished. 1 Link to comment Share on other sites More sharing options...
JLPurcell Posted January 24, 2018 Author Share #46 Posted January 24, 2018 (edited) 43 minutes ago, nix240z said: I worked my magic and have these ready to reproduce. One is plastic and the other is rubber plus the small finisher nut rubber seal. Should be about a week before I get some samples ready. I will update once I get them finished. I would like two complete sets, these parts along with the retainer nut cap piece. Thanks for making these available! I will take a look at your site it has been awhile since I ordered I probably will order a couple of other pieces. Edited January 24, 2018 by JLPurcell Link to comment Share on other sites More sharing options...
JLPurcell Posted January 31, 2018 Author Share #47 Posted January 31, 2018 This is a members antenna that I am helping him to restore. I an now awaiting the rubber parts. JLP 1 Link to comment Share on other sites More sharing options...
nix240z Posted January 31, 2018 Share #48 Posted January 31, 2018 Update.. I have sent a sample set to Zup for his review and opinion. 1 Link to comment Share on other sites More sharing options...
inline6
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now