auto trans oil drain plug location

[bigwiki]

Just bought a 77 280z with auto trans. I try to change the auto trans fluid. I have changed trans fluid on a few other cars. The drain plug is usually located on the trans pan. But I can't seem to find the transmission oil drain plug in the 280z. Any ideas?

[hr369]

there is no drain plug. you have to pull the pan to drain the fluid

[bigwiki]

That's going to be really messy.

[siteunseen]

I just read if it's not burnt? don't change it, it will cause slippage. Read post 5 & 6 & 10. 280z transmission oil change - Nissan : Datsun ZCar forum :Nissan Z Forum: 240Z to 370Z

[Stanley]

Not sure how great an idea it is to rely on gunk in the AT to prevent slipping. It's easy enough to adjust the bands - just need a small torque wrench - the Haynes manual says adjust to "exactly ___" (have to look it up). I'm no expert but the way I change the fluid is:

1. Put the front wheels on ramps.

2. remove the pan carefully, pour it into a big plastic pan.

3. take off the RH cooler line at the radiator and drain it into a container.

4. run the engine for a few seconds to get the fluid out of the torque converter (into the container).

5. adjust the bands and clean the screen and the pan.

6. bolt it back up. Put in the fluid. The AT won't work until it runs for a few seconds and fills up the torque converter.

Edited July 6, 2013 by Stanley