spudz Posted February 13, 2003 Share #1 Posted February 13, 2003 Hi All,I have a used Electromotive L9 cam for sale. I want $65.00 plus shiiping for it.One of the lobes has a small scuff in it.It can be repaired by Delta Cams or have it turned into a different grind. It is .490" lift 290 durations. Photos can be seen at the following link under the cam for sale ad. Cam Pictures Mike Link to comment Share on other sites More sharing options...
Znut73 Posted April 10, 2003 Share #2 Posted April 10, 2003 is this cam a rough ideal cam (lopey) and what is the power range on it sounds like a great deal Link to comment Share on other sites More sharing options...
spudz Posted April 10, 2003 Author Share #3 Posted April 10, 2003 Znut,It does have a nice lope to it. If I can remember right the power curve starts around 2500 rpm to around 6500. It was used on a street car , but it is right at theedge of being streetable. Link to comment Share on other sites More sharing options...
JEFF Posted April 11, 2003 Share #4 Posted April 11, 2003 spudz - Your picture link is erronious. How much do you think it weighs - i'll check on shipping if you give me your area code.- Jeff Link to comment Share on other sites More sharing options...
spudz Posted April 11, 2003 Author Share #5 Posted April 11, 2003 Here are the pics again. The link to the cam pics where on our old Zdriver.com server Link to comment Share on other sites More sharing options...
spudz Posted April 11, 2003 Author Share #6 Posted April 11, 2003 Here is a pic of the scuffed lobe . Jeff my zip code is 83835 . Weight is just under 10 pounds. Link to comment Share on other sites More sharing options...
Znut73 Posted April 12, 2003 Share #7 Posted April 12, 2003 would you have to purchace anything else with this cam swap?and what would be the shipping to 95939 CA. Link to comment Share on other sites More sharing options...
JEFF Posted April 13, 2003 Share #8 Posted April 13, 2003 Znut73 - You can check the shipping by calling or going to the local UPS / FEDEX office. Tell them spudz's area code and your area code along with the weight and lendth - they will give you a price.- Jeff Link to comment Share on other sites More sharing options...
2ManyZs Posted April 13, 2003 Share #9 Posted April 13, 2003 Or you can use this to get an estimate....http://www.fedex.com/ratefinder/home?cc=US&language=en Link to comment Share on other sites More sharing options...
technicalninja Posted April 14, 2003 Share #10 Posted April 14, 2003 Years ago i purchased a electramotive cam for a customer and it was asymetrically ground,(ie opening ramp steep,closing ramp shallow) Is this cam like that? it would be nice to have more pictures of it it is hard to view the wear with out angle veiws. Are the lash pads that cam ran with available? If they are have they been marked for position? what is wear on other lobes like? Link to comment Share on other sites More sharing options...
spudz Posted April 16, 2003 Author Share #11 Posted April 16, 2003 Hey Guys,I will get a few more pics of the cam this week. I believe the can is ground that way. It is what sets the Electamotive cam apart from some of the cheaper cams out there.I will only charge a flat $7 shipping charge for US shipping. Link to comment Share on other sites More sharing options...
zKars
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now