how to add the air/dam to the Z

Posted February 15, 200322 yr

hello i purchased a air/dam from someone and wondering how to put the thing on if you can help i would be greatfull thanks for your time and know how

Link to comment

https://www.classiczcars.com/forums/topic/4716-how-to-add-the-airdam-to-the-z/

Share on other sites

Remove Ads

February 15, 200322 yr

comment_26796

Well Znut73, it's like this. They are all pretty much straight forward. Usually, you will remove the front valance (under the bumper) by removing the screws holding them on at the joint below the turn signals and then possibly removing the lower side pieces. Next would usually be to bolt on the air dam where you removed the 3 other pieces. BUT...there is always a but, it would help to know what year your car is and what kind or type of dam you have....maybe you can post photos and we can provide more help.

Link to comment

https://www.classiczcars.com/forums/topic/4716-how-to-add-the-airdam-to-the-z/#findComment-26796

Share on other sites

February 15, 200322 yr

comment_26800

The BRE Spook series of spoilers (and I'm mentioning it only cause some people will call that an air dam as well) mount to the front valance and turn signal fender quarters.

2Â¢