76 Rear Quarter

[Kevyz]

Hey everybody. Any recommendations on where I can get this repaired in or around Houston? I've searched welders and bodyshops. Thanks!

[Patcon]

Your best bet would be to find a body shop or a body man that does work on the side. Go to a local paint store PPG / Finish masters etc. Tell them what you need and ask them to recommend somebody. One of the guys at my Finish masters does work on the side. I would do a small section cut and just replace that area that got hit and pulled out. The patch metal could be taken from almost any quarter panel even a rusty one because they tend to rust lower or around the wheel arch so that area is normally good...

Charles