Posted September 24, 201311 yr comment_432306 My speedo quit working the other and I noticed some oil around the pinion gear. I tried to loosen the speedo cable and the pinion gear just pulled out of the tranny because the little ear piece was loose and ahd turned. I know there are O rings and seals for the gear and the cable, but can't find and diagrams to show where they go, the only one I know for sure( also the only one I found) is the O ring around the gear holder. I need to replace the black gear as its sorta chewed up. The tranny is a 79 Z 5 speed and the cable is the stock 75. I need a diagram of some sort to know what goes where and I can't find it in the FSM. Any help would be greatly appreciated, thanks. Link to comment https://www.classiczcars.com/forums/topic/47487-need-help-with-speedo-pinon-gear/ Share on other sites More sharing options...
September 24, 201311 yr comment_432313 I found this, http://www.classiczcars.com/forums/help-me/41728-speedometer-not-working.html, maybe something there that is useful? Link to comment https://www.classiczcars.com/forums/topic/47487-need-help-with-speedo-pinon-gear/#findComment-432313 Share on other sites More sharing options...
September 24, 201311 yr comment_432321 Something like this: FWIW, Carl B. Link to comment https://www.classiczcars.com/forums/topic/47487-need-help-with-speedo-pinon-gear/#findComment-432321 Share on other sites More sharing options...
September 24, 201311 yr Author comment_432329 Thanks Carl, where did you find that? I got the O ring covered but not real sure about the oil seal part #60. MSA has a large and a small O ring, is the oil seal actually an O ring? I assume it goes into the pinion gear housing or does it go over the end of the cable? I looked at that thread and it has good pics of the parts all layed out, but none of them put together. Thanks again. Edited September 24, 201311 yr by mjr45 Link to comment https://www.classiczcars.com/forums/topic/47487-need-help-with-speedo-pinon-gear/#findComment-432329 Share on other sites More sharing options...
September 24, 201311 yr comment_432333 I have purchased one of these a few years ago from the same vendor - worth every penny. You may want to grab it while you can. It will pay for itself quickly - just give the item code to your Nissan dealer and if it is still being made you will not have to go to MSA anymore - my parts manager gives me his body shop rate.Datsun S30 240Z 260z 280z Fairlady LH Parts Catalog 1977 USA Canada Model | eBay Link to comment https://www.classiczcars.com/forums/topic/47487-need-help-with-speedo-pinon-gear/#findComment-432333 Share on other sites More sharing options...
September 24, 201311 yr comment_432345 Here's a link to more than you would ever want to know about the o-ring & seal. Just scroll down through the messages to find procedure and part numbers. http://tinyurl.com/cf4yvcc Also, see details below. Dennis Link to comment https://www.classiczcars.com/forums/topic/47487-need-help-with-speedo-pinon-gear/#findComment-432345 Share on other sites More sharing options...
September 25, 201311 yr Author comment_432383 Thanks guys for the help, I believe I know what to do now. I'll try the drill bit trick to see if I can get the oil seal out, now that I know what I'm looking for. Thanks again. Edited September 25, 201311 yr by mjr45 Link to comment https://www.classiczcars.com/forums/topic/47487-need-help-with-speedo-pinon-gear/#findComment-432383 Share on other sites More sharing options...
Create an account or sign in to comment