Roof rust, and floor rust.....

[New_BE]

Hey 1moeZ, hope ya don't mindi linked this to what you posted, only thing i can see that is near what i got going on here.

Anyways this is where i need help, so take a look at this http://www.classiczcars.com/forums/attachment.php?s=&postid=25290

Ok now what i got on my car isn't that bad, it's more BAD surface rust, than a hole through the roof. I just got it this summer went through some REALLY REALLY bad rainstorms, well no leaks. Buti bet if i leave it any longer it will be comming through the roof. So how do i go about fixing this? I got welder access, i can weld alright, but my uncle is a welder. My dad can help with minor body work, and if i have the slightest indication that he can't do it properly, i'm calling a shop. I don't think that it shuld be that difficult. Can anyone point me in the direction? thanks. IS there anything i should know about pulling the window? i know that's gonna have to come on out.

About the FLOOR rust

As some of you might know i fixed it "temporairly" and i'm going to be putting in new ones this spring along with fixing the roof. and those "rails" that are part of the uni-body i blelive, well those are gonna get fixed up too. So how to i romove those from the rails underneath/around the engine where they are welded to...something, sorry don't really know what it is. And how to i jack this up to hold it up properly, while i do this work on the floor and rail. And someon posted a site where they have the rails that are attached to the floor boards already, these a good choice? Or shoudl i try and find something that has them seperate? So i could throw the rail in, while it's there i could put the floor in on top of the "rail".

A site that will help with this or some help from you folks would be appreciated.

Anyone know a good place taht will ship to Winnipeg, Manitoba, Canada. ??? thanks alot

[Bambikiller240]

Originally posted by New_BE

A site that will help with this or some help from you folks would be appreciated.

Anyone know a good place taht will ship to Winnipeg, Manitoba, Canada. ??? thanks alot

Charlie Osborne of Zedd Findings in Canada is the place to buy your floor and frame rail parts. Check out the link below:

http://www.datsunzparts.com/start.htm