Petrolicious - Dare To Be Different In A 240Z

[Hardway]

This is the latest in Petrolicious' weekly video series. The sound of the Robello engine is just intoxicating! I would love to know just how good of a deal this guy got seeing that the engine alone probably cost $8K+. Still, a GREAT video as always by these guys. Enjoy.

Dare to Be Different in a Datsun 240Z | Articles

 

[spitz17]

Great video and car. It's set up pretty much exactly the same as mine, down to the wheels and tires!

[madkaw]

Great video and car. It's set up pretty much exactly the same as mine, down to the wheels and tires!

So is it true that the motor has nothing below 5krpm like stated in the video. I have a hard time believing that the L 6 has no torque down low unless his motor his set up with a 8krpm power band

[psdenno]

Thread on this topic was started earlier in the week:

VIDEO: Dare to be Different in a Datsun 240Z

Dennis

[LeonV]

So is it true that the motor has nothing below 5krpm like stated in the video. I have a hard time believing that the L 6 has no torque down low unless his motor his set up with a 8krpm power band

Either he was being dramatic, his engine isn't tuned right, or he's got an absolutely monster cam in there because L-series engines typically have a fantastic mid-range. I'd believe nothing under 3k RPM, but nothing below 5k? Like I said, he seems to overemphasize a bit...

I recently built an L28 with a 280deg/.540" lift cam and the thing has no issues idling at 800rpm and flies after 2-3k RPM.

[madkaw]

That's kind of the sense I got - that he was exaggerating a bit or that's a 10k rpm motor;)

[Jeff G 78]

That car sounds amazing!

[oranngetang]

I think he's running higher comp than me, since he's talking race fuel. My 91 tune is making a little over 250 HP by 5000 RPM, but only 175 HP at 4000.

[bartsscooterservice]

Either he was being dramatic, his engine isn't tuned right, or he's got an absolutely monster cam in there because L-series engines typically have a fantastic mid-range. I'd believe nothing under 3k RPM, but nothing below 5k? Like I said, he seems to overemphasize a bit...

I recently built an L28 with a 280deg/.540" lift cam and the thing has no issues idling at 800rpm and flies after 2-3k RPM.

I read one of his reactions on youtube and he didn't mean it that way, only that the engine comes alive in the higher rpm range.

[LeonV]

I read one of his reactions on youtube and he didn't mean it that way, only that the engine comes alive in the higher rpm range.

 

Whoa, that was a while back! In retrospect, my comment sounds rather presumptuous and dickish. I love the car and the video!