Anyone tried this kit?

Electronic Ignition Conversion Replaces Points IN Hitachi Distributor 6 CYL | eBay

Or know where I can get one in Australia?

Can you get a Pertronix Ignitor in Australia?

Just looked into it and looks like I can get it from bursons. Will try them tomorrow. Have you used that product?

Personally, I have not, but lots of people in the 240Z world have. Search through the archives here. You'll find plenty pro & con.

Curious how you go mate

Went to bursons today and unit alone was 235 bucks. Went online and got same unit and high voltage coil for 160 delivered from u.s. I try to shop local but sometimes I just can't.

Review it for us when it's fitted

I'm in the US at the moment and bought a Petronix kit and coil. Will let you know how it goes when I fit it.

Will have to wait a few weeks for mine but will keep you posted as well.

I'm in the US at the moment and bought a Petronix kit and coil. Will let you know how it goes when I fit it.

I was reading some of the posts in z section and saw they where buying reco dizzys for $125ish. So jealous of the parts prices in the U.S.

Got my kit today, fitted it up easy as. I also replaced my dizzy with a spare one that had no play in the shaft which was probably most of my problem. Anyway kit in and set timing, had very smooth idle and still yet to drive. Plenty of pics in z section which explain it well. Only question I have is my original coil is 1.5 ohm with an external resistor of 1.6 ohm. Instructions say to leave all resistors in place but my new coil is 3 ohm so should I remove external resistor? Will hit the z section again I think. Will update when I drive it.:-)