Series 1 hatch vent clips

[240dkw]

I am in need of four clips, does anyone have a source for these or something close? Or 4 spares collecting dust?

Dan

[240260280z]

Wish I did. I'd send them

[djwarner]

I'm assuming you are looking for the sheet metal nuts that fit inside the black funnels that hold the chrome vents in place. More importantly, they hold the funnels against the inside of the hatch preventing fumes from entering the cargo area.

Mine are also missing. As a work around, I used some half inch closed cell foam insulation between the funnel and bottom of the inner hatch to hold the funnel in place. To secure the chrome vents in place I used some clear plastic glue.

[Namerow]

pm sent

[240dkw]

djwarner: Yes those are what I am looking for. The part number is 90829-E4100 based on a old post.

Dan

[mgmoreau]

Hi Dan,

Are you talking about the little clips that slide over the studs on the vents and emblems to hold them into the holes for the vents? I have a set of NOS vents if you are interested send me a PM.

Thanks,

Marc

[240dkw]

Marc: Thanks for the offer, I am looking for the u shape clips that hold the ducts in place and the barrel clips on the vents push into.

Dan

[mgmoreau]

Dan,

I think you can order the barrel clips from Nissan. When I get home later today I will get you the part number for the clips. I am not familiar with the U shaped clips you mention. What year is your car?

[240dkw]

Marc: The clips are the ones in the second photo in this post.

Classic Zcar Club - Hatch Vent Trim Installation

[240260280z]

Here is the original: http://www.classiczcars.com/forums/body-paint-s30/43784-hatch-vent-trim-installation.html

[mgmoreau]

Marc: The clips are the ones in the second photo in this post.

Classic Zcar Club - Hatch Vent Trim Installation

Dan,

I am checking with a few friends to see if they have these clips and would be willing to sell them. I will let you know as soon as I hear back from them.