901 Silver Metallic - How to Match this Color?

[sdaughtry]

I searched the forum and learned two things:

1. The interior metal components (e.g. tool lid cover) with the factory silver is NOT the same as what was originally sprayed on my '73 exterior (which shows 901 paint code on the engine bay sticker). My car has been resprayed sometime during it's life a metallic silver, but it wasn't a quality paint job.

2. No posts shared how fellow ZED owners matched up their 901 silver when they purchased their paint.

My car is currently in the body shop to get straightened / painted - I am sticking with the factory 901 color. What I am hopeful for is someone can help me with some type of paint code that the paint supplier will be able to use to get the Datsun Silver Metallic 901 color right the first time. I've looked all over the Internet (thank you Google) but that one piece of information has thus far been elusive.

I believe my body shop craftsman purchases his paint from the local Albuquerque NAPA store... don't know if that helps.

I thank you in advance for reading through this post and taking the time to reply

[EuroDat]

Blue posted this thread http://www.classiczcars.com/forums/techhttp://www.classiczcars.com/forums/fuel-injection-s30/18449-280z-fuel-pressure-regulator.html-pubs-howto/43248-datsun-paint-codes-1969-1983-a.html on colour codes. The Ditzler p/n might help.

Chas

[sdaughtry]

Greetings - thank you for the quick reply. Could you provide a correct link to that thread - the one you have above doesn't go anywhere

[EuroDat]

Not sure what went wrong there, but its in the "Tech tips & How to" section of the forum. You can find it on the second page under the title "Datsun Paint Codes 1969 - 1983.

Maybe your body shop can cross reference the codes?

Here is the link again. Maybe it works this time.

http://www.classiczcars.com/forums/tech-pubs-howto/43248-datsun-paint-codes-1969-1983-a.html

Chas

Edited January 13, 2014 by EuroDat

[sdaughtry]

Found it!

http://www.classiczcars.com/forums/body-paint-s30/33061-ppg-paint-mixtures-color-code-901-32910-light-grey-poly.html

Thank you EuroDat for your posts!

[Carl Beck]

Wonder if anyone has actually purchased paint mixed to the above PPG Formula - and if so how did it turn out?

Carl B.

[Zedyone_kenobi]

May be getting my 901 silver painted within a year as well. This intrigues me.

[sdaughtry]

My car is nearly ready for primer; will be sprayed next week. I have some pics of 901 silver colored 240's downloaded to determine how close the formula matches. I will let you know!

May be getting my 901 silver painted within a year as well. This intrigues me.

[Galaxybj]

I had mine painted last year. It came out a bit lighter than the original 901. I don't know if the color of the primer would make a difference, but the factory primer was a "rust reddish" color. Grey primer was used for the new paint. Oh, I'd have to check to see what brand of paint was used as I don't recall now, but I am fairly certain it was not the PPG. Wish I had researched for that prior to the paint job. Oh well.... Look forward to possibly seeing your car after the paint job. It looks realy good as is.

[Casey_z]

When we painted this a few years ago we based the paint on the original code. Base coat clear coat will never look like the original paint that was used.The colour is looks deeper due to the clear coat and the fact that we dropped a little extra coarse metallic in the paint for depth.

Still it is close and is a great colour on a 240z.

Casey

[sdaughtry]

Your ZED is exactly the look I am going for.. it's my understanding the paint used a few decades back can't even be purchased any more (due to EPA regulations) - not to mention that Datsun back in the 1970's probably didn't put a whole lot of effort into paint to increase profits <g>. Matching paint seems to be a science - I've had a WRX STi and a Dodge Challenger 392 repainted in the past couple of years - the STi was jacked up (they didn't match the silver perfectly - and the body/paint shop was a Big Three car dealer) and the 392 they sweated matching the paint for a week straight, as the computer's formula produced paint that wasn't a perfect match - they had to eventually produce small batches and then eyeball the color to match the rest of the car. Your car is stunning, and hopefully the effort being put into mine by a very meticulous professional that I stumbled onto here in town will make me proud <g>!

When we painted this a few years ago we based the paint on the original code. Base coat clear coat will never look like the original paint that was used.The colour is looks deeper due to the clear coat and the fact that we dropped a little extra coarse metallic in the paint for depth.

Still it is close and is a great colour on a 240z.

Casey

[ATTACH=CONFIG]69265[/ATTACH]

[240dkw]

As well, when my painter asked for the paint code, he was happy with 901. I offered the PPG formula to him but he said that the Datsun 901 was enough. I do not have a factory painted car to compare it to, so I hope it is correct.

Dan