240z_is_king Posted February 19, 2014 Share #1 Posted February 19, 2014 I replaced the drive belts on my early 71 Z about a month ago. I also replaced the alternator with that of a 280z. After this, my oil pressure gauge stopped working outright. Even after driving it for a bit, it does not move at all. The engine temperature is reading. Just trying to rule out the problem, I bought a new oil pressure sensor, and now I can't locate where the old one is. Any help would be appreciated. I have a general idea of where things are in the engine from my repair manual. Link to comment Share on other sites More sharing options...
cbuczesk Posted February 19, 2014 Share #2 Posted February 19, 2014 You probably disconnected the wire. It's on the right side of the engine in front of the oil filter and above the motor mount. I think it's a single wire with a push-on connector.Chuck Link to comment Share on other sites More sharing options...
240z_is_king Posted February 19, 2014 Author Share #3 Posted February 19, 2014 You probably disconnected the wire. It's on the right side of the engine in front of the oil filter and above the motor mount. I think it's a single wire with a push-on connector.ChuckYeah just found the wire I forgot to reattach. Thanks for the tip Link to comment Share on other sites More sharing options...
Parman
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now