5 speed manual transmission identification

[Tirnipgreen]

19 minutes ago, Patcon said:

I replied in your ad, but why an R180 over an R200?

Doesn't the R200 involve modifications...? Not sure I am up for that...

[Tirnipgreen]

Just now, Dave WM said:

That means you get one burnout instead of two when you dump the clutch.

 

Hey...My father had the same Kiwi shoeshine box as in your pic...! Awesome...!!!

[Terrapin Z]

1 minute ago, Tirnipgreen said:

Question...what is meant by an "open" differential. 3:70 i probably what I am looking for as long as it is a "plug and play" unit as I am really not up for an modifications to my current setup. Thanks, Terrapin...!

I swapped out my stub axles so the Z half shafts would still work. That was a bit involved. Some of the truck diffs have the bolt on stubs and are much easier to change over to your stubs. 

As Patcon said open means no limited slip. 

[Terrapin Z]

22 minutes ago, Tirnipgreen said:

Doesn't the R200 involve modifications...? Not sure I am up for that...

Here is a good write up on that subject. 

http://www.zhome.com/ZCMnL/tech/R200.htm

[Patcon]

The R200 is a tougher unit. I might have an open 3.9 in the shop and if by some chance you came across an LSD R200 you would already be set up for it. I do not have the other parts you would need. Terrapin might have those

[Yarb]

LSD R 200 units are extremely rare. If you can find one grab it. Not sure where you are located. Tried to look at your profile and it errored out. I have a R200 3:90 available but not interested to ship it. Just too costly.

[dutchzcarguy]

10 hours ago, Yarb said:

I have a R200 3:90 available but not interested to ship it. Just too costly.

Early this year i bought a R180 in parts and shipped it in 2 boxes.. maybe an idea to do that too?  outer casing separate from "the rest" also got new bearings with it.. just need to put it together again. 😉