Jump to content
Email-only Log-Ins Coming in December ×

IGNORED

Electrical gremlins


Wwildman

Recommended Posts

Well my car has sat for 14 years and it runs great I cleaned all of the electrical connectors then applied dielectric grease. the car started randomly cutting off well I have checked it is the ignition relay. I pulled it out and apart it was full of water :ermm: so I cleaned it with contact cleaner and it wroked for about 30 seconds . So I ordered a new one from courtesy parts. My big plan is with in the next 2-3 weeks I am going to replace all the relays. is ther any thing else I should be worried about ?

Link to comment
Share on other sites


Do you store your car outside? It sounds like you have a leak around your windshield.

Anyway, I would expect that you'll hear back from Courtesy that the ignition relay is NLA. If that happens, send me a PM. I can make a replacement for you.

Link to comment
Share on other sites

I'd be worried about how the ignition relay got full of water.
Do you store your car outside? It sounds like you have a leak around your windshield.

Anyway, I would expect that you'll hear back from Courtesy that the ignition relay is NLA. If that happens, send me a PM. I can make a replacement for you.

The windshield does leak because of a huge gap in the rubber. it is on the list .

Steve I will let you know if they say they do not have it.

What is needed to build one?

Link to comment
Share on other sites

I use a dual relay socket, two SPDT relays, one ring lug and a 6 pin connector. The wiring diagram is on this site. You just have to search for it. If you're in a hurry to get the car going, I could have one in the mail to you tomorrow. I have all the parts.

Link to comment
Share on other sites

I use a dual relay socket, two SPDT relays, one ring lug and a 6 pin connector. The wiring diagram is on this site. You just have to search for it. If you're in a hurry to get the car going, I could have one in the mail to you tomorrow. I have all the parts.

Actually figured it out I did not have a 6 pin connector but used blade terminals and one ring terminal

Link to comment
Share on other sites

Well built my own relay worked great. Drove car down to get something to eat after 30 min of sitting I went to leave and no start:mad:. I get the car home run every test in the FSM and bible. I am loosing signal from pickup when I have a hot soak.I ordered a new pick up and will let you know.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.