I make headlight covers for G-nose Zs. The plastic will not crack and is crystal clear. I make them in the OE size to fit under the trim rings. If you don't have trim rings, I also make them in a smaller radius for a flush fit with the edges of the light buckets and include L-braces made from the same plastic to mount the covers with. I'm asking $189/pair. Feel free to email me at: mclapp1@att.net or call anytime at: 816-286-6982.

Thanks,

Mark Clapp

Hi G-Nosers, I just received some photos of the G-nose headlight covers I make in the OE size fitted under the trim rings.  These are on an OE G-nose that the owner is installing on his car soon.  I don't carry the rings and if you don't have them, I also make them in a smaller radius for what I call a "flush fit" with the light bucket edges (see the previous post).  I'm asking $189 for both sizes. 

Hi G-nose Fans, I just wanted to post and say that I'm still making the headlight covers for the G-nose Zs.  The plastic will not crack.  I make them in OE size to fit under the trim rings.  If you don't have the trim rings, I also make them in a smaller radius for a flush fit with edges of the light buckets.  I'm still asking $189/pair.  I have a new email address:  mclapp5526@gmail.com or feel free to call me anytime at:  816-286-6982.

Thanks,

Mark Clapp