240260280 Posted July 11, 2017 Share #505 Posted July 11, 2017 (edited) Or his namesake boat? Edited July 11, 2017 by 240260280 1 Link to comment Share on other sites More sharing options...
siteunseen Posted July 11, 2017 Share #506 Posted July 11, 2017 13 hours ago, grannyknot said: Maybe a real Ratsun this time, Cliff has commissioned me to build him a Rat Rod out of this car but no money has shown up in my paypal account yet, that's strange. I was thinking you said "Rat Lodge" and were going to pay me to send up some Alabama Rats? 1 Link to comment Share on other sites More sharing options...
grannyknot Posted July 11, 2017 Author Share #507 Posted July 11, 2017 (edited) 20 hours ago, Captain Obvious said: I'm thinking Pursuit Interceptor: Isn't that a bit clean for Max's taste? I'll bet the guys that own those interceptors hate the association their cars have with the Mad Max franchise, badass car though. Well, Jody still has the car, going into the second week now, he's not happy with a section of the roof so is respraying the whole roof, says it's going to be a few more days until I get it back. I've cleaned up the shop, put another coat of paint on the floor, overhauled the drill press, done maintenance on all the vehicles... I'm going to be oiling the kitchen cupboard hinges soon if I don't find something to fix. I'm going to have to get busy the minute I get it back putting on the rest of the trim, bumpers, badging, to get it ready for Zfest on the 23rd. Edited July 11, 2017 by grannyknot 1 Link to comment Share on other sites More sharing options...
Captain Obvious Posted July 12, 2017 Share #508 Posted July 12, 2017 Haha! I don't know if the other owners with those kinds of cars like the association or not. I guess it would depend on the association. On a related note, I went to a show a couple weeks ago and there were maybe thirty DeLoreans there. And almost all had some sort of reference to the Back To The Future movies. Looking very hard, I think I found three of the thirty on which I could find no reference to the movies. Link to comment Share on other sites More sharing options...
Namerow Posted July 12, 2017 Share #509 Posted July 12, 2017 12 hours ago, grannyknot said: until I get it back. I've cleaned up the shop, put another coat of paint on the floor, overhauled the drill press, done maintenance on all the vehicles.. Did you find your o-a torch head yet? p.s. Thx again for the help with the brazing. After I dressed down the two ports, the manifold went back in the blast cabinet to clean it up again, after which ti got a coat of VHT primer. Needs to cure for a week before I can do the finish coat. I was tempted by your idea of sawing off the nut heads and tapping the holes to take some nice, shiny brass plugs... but I got over it. Link to comment Share on other sites More sharing options...
grannyknot Posted July 12, 2017 Author Share #510 Posted July 12, 2017 11 hours ago, Namerow said: Did you find your o-a torch head yet? p.s. Thx again for the help with the brazing. After I dressed down the two ports, the manifold went back in the blast cabinet to clean it up again, after which ti got a coat of VHT primer. Needs to cure for a week before I can do the finish coat. I was tempted by your idea of sawing off the nut heads and tapping the holes to take some nice, shiny brass plugs... but I got over it. No I haven't, I have a complete set of oxy/acet welding tips that I safely put away...somewhere in the shop, very well hidden. Had to use a cutting torch tip to braze John's exhaust manifold, It can be done. Link to comment Share on other sites More sharing options...
Namerow Posted July 13, 2017 Share #511 Posted July 13, 2017 1 hour ago, grannyknot said: No I haven't, I have a complete set of oxy/acet welding tips that I safely put away...somewhere in the shop, very well hidden. Had to use a cutting torch tip to braze John's exhaust manifold, It can be done. Grannyknot's other nickname is, 'Teddy The Torch'. Link to comment Share on other sites More sharing options...
grannyknot Posted July 22, 2017 Author Share #512 Posted July 22, 2017 Okay, here is what I'm taking to Zfest, spent the past couple of days compound buffing wet sanding scratches out of it and installing the bumpers. There is still a few things to do but there will only be a few guys there at the show that will notice. 4 Link to comment Share on other sites More sharing options...
Patcon Posted July 22, 2017 Share #513 Posted July 22, 2017 I love it!!!! So jealous... Keep it straight and rubber down! Link to comment Share on other sites More sharing options...
Captain Obvious Posted July 23, 2017 Share #514 Posted July 23, 2017 Fantastic! I'm so glad I got a chance to see the original carcass before the work began. Gives me a greater sense of the amount of work you went through. Now all I have to do is see it now that it's done! So one question though... What are you going to do now? Your wife probably doesn't want you in the house that much. Has she started suggesting other projects or hobbies for you? Link to comment Share on other sites More sharing options...
siteunseen Posted July 23, 2017 Share #515 Posted July 23, 2017 If he's a landscaper he'll have all he wants to do now that the Z is done. Hard to find guys that have his skill and attention to detail in that business, around here anyhow. I've been using .105" red round line for 10 years but just bought a 3lb spool of .095" orange round. I noticed it a lot in your pictures so that was good enough to make that decision for me. 155 more feet at just 3mm smaller. Link to comment Share on other sites More sharing options...
grannyknot Posted July 23, 2017 Author Share #516 Posted July 23, 2017 8 hours ago, Captain Obvious said: So one question though... What are you going to do now? Your wife probably doesn't want you in the house that much. Has she started suggesting other projects or hobbies for you? Well you know I have a bad habit of putting For Sale signs on projects once they are finished because after all, they are done, nothing else to fiddle with. I'm not done with it yet but I know sooner or later some other project will grab my eye. Actually there is a young guy in the next town over who has started restoration on a 72 240z, so far I go over every Sunday and give him a hand with the fun stuff and he spends the next week dismantling and scraping and getting dirty, it's working out very well, kinda like being a Grandparent. Zfest was down on attendance today as rain was forecast but there was a total of 112 Z cars and about 22-24 of those were S30's 1 Link to comment Share on other sites More sharing options...
olympianZ
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now