High Quality Seals For Engine And Transmission On A 240Z

[jalexquijano]

I need the following parts for my 240z but with Premium high quality standards:

 

Urethane Bushing kit

 

Steering Rack boots

 

Crankcase gasket or ENgine overhaul gasket kit

 

Rear Main seal / crankshaft

 

Front and Rear transmission Seal

 

Front cover gasket engine

 

Rear differential cover seal

 

Rear differential Seal

 

Should i purchase these seals and bushings in Black Dragon or should i really invest on high end part supplier? if so which one carries all these parts.

 

 

[jalexquijano]

Will Rock-Auto sell these seals? I really prefer OEM Nissan gaskets. Anyone?

[EuroDat]

I use the OEM stuff, mostly because it doen't cost mush more than the others and I know the quality is ok. Engine gasket kits might be a different story and the performance aftermarket kits may be better.

Don't have much experience onthe PU bushing kits. I bought minefrom energy suspension and a TC rod kit from MSA.

BTW I didn't use all the kit. I left the transmission mount bracket bushes as is and some people recommend leaving the mustache bar alone if the car is a daily driver or just street use. Changing these tend to make the ride harsh.

Chas

[jalexquijano]

I read good reviews on Ishino engine gasket seals. They are available on Amazon and Partgeeks which has a better Price.

 

Any advice on these seals i have mentioned initally.

[71Nissan240Z]

Felpro is pretty good I have one of their master gasket kits laying around in my garage. I go Felpro if I can't find oem.

[madkaw]

I just received a complete engine gasket kit from Rock-auto, it is a Felpro kit. The reason I like Felpro is that no seals are cork. The kit is 20$ more than the others, but much better in my opinion. The HG seems to be a newer design and looks good.

[71Nissan240Z]

I kinda like the corked gaskets. They seem to conform better to un even surfaces. But yeah. The felpro kit is good.

[metalmonkey47]

Felpro or Nissan on the gaskets. If buying seals separate, Timkin is thew only way to go. 

[IncredibleMrZ]

Just finished installing these urethane bushings. Very high quality. The kit came with every rubber part on the suspension except the front dif mount but mine was okay anyway. Felpro is a good gasket. Used them for years in drag racing, no issues. They're usually available at a local parts house or easy to order next day and the price is fair.