Front Cover/dizzy Hold-Down

[zKars]

You're missing the flat plate that is referenced above in post #20 from zccjdm. It goes between the dizzy and the base mount. The plate mounts to the dizzy with a 5mm bolt up from the bottom, then the 6mm adjustment bolt goes down through the plate into the base hole.

The base on the right in the pictures is the right one you need, you're just missing the intermediary plate. I have one if no one closer chimes in.

Edited March 16, 2015 by zKars

[CEgg11]

Makes sense.I'll check drawers and shelves. Thanks!

[rcb280z]

The base on the right in "Blue's" tech tip is the right one. I have an extra one as well.

[CEgg11]

No joy in finding the intermediate plate. Will happily pay for one if anyone has. Hopefully north Georgia area?