Will 240Z Door Pulls Fit A '78?

[TomoHawk]

I think the armrests on the 78 aren't that nice, and I like a minimal amount of stuff, so I saw an auction for a door pull on eBay described as "1970 - 1978" so I wondered if it would actually fit on my 1978.

 

I can get a measurement of the distance between the 2 main mounting screws if anyone can do the same on a 240Z door  pull.  After that all you'd haft to do is to cover the third hole.

[siteunseen]

I've got a 240 driver's side armrest in my shed I can measure later today.  I could get pretty close measuring the pulls on the passenger's side door, they have those plastic chrome covers on there and they're mounted in the cars.

[zKars]

Don't bother. No fiitty... Very different.

[TomoHawk]

The drill press will make it fitty     Or I will just go see what's in my box of stainless steel scraps, and a bit of leather.

[siteunseen]

Okay here you go, 9 and 3/4" between the two holes.

 

 

That's the drivers side if it matters?

[TomoHawk]

The armrest holes measure 7 3/4 inches on mine.  I thought the 240Z had a pull strap too?  I would like to see if you can leave the arm rest off.

[siteunseen]

Mine have the pull strap on the passenger's door only, as well as an armrest.