wheee! Posted June 8, 2015 Author Share #73 Posted June 8, 2015 (edited) Hats off to you my friend! Thanks Matt! Looks pretty hardcore mark! Looking forward to see your progress Soon.... Very soon...! Speaking of progress... Where's your's at???? Edited June 8, 2015 by wheee! Link to comment Share on other sites More sharing options...
takayuki Posted June 10, 2015 Share #74 Posted June 10, 2015 My car is running and moving under its own power now. almost there. Sorting out all the gremlins. 1 Link to comment Share on other sites More sharing options...
HuD 91gt Posted June 11, 2015 Share #75 Posted June 11, 2015 Wow. I like your dedication to DIY! 1 Link to comment Share on other sites More sharing options...
wheee! Posted June 15, 2015 Author Share #76 Posted June 15, 2015 Almost two months and a few thousand dollars later, I am seeing the light at the end of the garage tunnel.... A few more sheets to go up on the ceiling, a little more vent work and a coat of paint and the interior shell will be done! After that, I will set up a couple benches and a shelving system and install the overhead fluorescents and the car project can finally begin!!!! whew.... 1 Link to comment Share on other sites More sharing options...
EuroDat Posted June 15, 2015 Share #77 Posted June 15, 2015 Mark, You are a hardcore hobbiest that for sure. I admire your dedication and enthusiasm. 1 Link to comment Share on other sites More sharing options...
wheee! Posted June 25, 2015 Author Share #78 Posted June 25, 2015 Inherited a set of gently used Dapper HID headlights from another member that went another route! Lucky me! Add those to the parts shelf.... Link to comment Share on other sites More sharing options...
wheee! Posted June 29, 2015 Author Share #79 Posted June 29, 2015 Garage is almost done! Ceiling downdraft ventilation to go in still...https://vimeo.com/132142797Sent from my iPizzle ringy dingy device.... Link to comment Share on other sites More sharing options...
wheee! Posted July 2, 2015 Author Share #80 Posted July 2, 2015 WorkBench is in. Power supply and paper masking roll set up. Moved the car outside to clean up under it... Still a lot to do and clean up! Sent from my iPizzle ringy dingy device.... Link to comment Share on other sites More sharing options...
EuroDat Posted July 2, 2015 Share #81 Posted July 2, 2015 Now you got me curious. What is that gadget left of the window? That down to the left of the "Dad's garage" sign. Cool sign btw. Link to comment Share on other sites More sharing options...
wheee! Posted July 2, 2015 Author Share #82 Posted July 2, 2015 The controls you see are for the sprinkler system. Top one is the remote rain gauge. They were already in when I bought the place so I had to leave them where they are. There is also a thermostat for the furnace and then the power panel. Below that is the 240v welding circuit. Sent from my iPizzle ringy dingy device.... Link to comment Share on other sites More sharing options...
wheee! Posted July 9, 2015 Author Share #83 Posted July 9, 2015 The teardown begins... the first things to go are the ugly 5mph bumpers! Sent from my iPizzle ringy dingy device.... Link to comment Share on other sites More sharing options...
wheee! Posted July 9, 2015 Author Share #84 Posted July 9, 2015 The bumper shocks will be the mount points for the rotisserie. Sent from my iPizzle ringy dingy device.... Link to comment Share on other sites More sharing options...
KenFirch
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now