Unfortunately it is thick in places. Lots of paint jobs over the years. I'm hoping the base metal is straight and will leave me a clean canvas to start all over again.

Sent from my iPizzle ringy dingy device....

Another good example of how a sand blasting cabinet and fine abrasive glass can clean and restore parts!

Sent from my iPizzle ringy dingy device....

Apparently the donor panel was a smurf!

Sent from my iPizzle ringy dingy device....

Going to visit Fergies Custom Louvers today! See if I can get some pics of the louvering process for you nerds.

Sent from my iPizzle ringy dingy device....

Going to visit Fergies Custom Louvers today! See if I can get some pics of the louvering process for you nerds.

Sent from my iPizzle ringy dingy device....

Looking forward to it, I'm just about to send him the 2 service lids on either side of the hood.

I haven't been able to load the pictures onto my computer yet as I am still in the Okanagan. I can tell you that he was able to punch 4 louvers in each side. I had hoped for more but the metal underneath the inspection door is doubled at one point and doesn't allow for louvering. Looks good still! Pics to come by Friday...

Sent from my iPizzle ringy dingy device....

Edited September 3, 20159 yr by wheee!

As promised!

Fergies shop

The process

The result

Sent from my iPizzle ringy dingy device....

Edited September 4, 20159 yr by wheee!

Two more!

Sent from my iPizzle ringy dingy device....

Edited September 4, 20159 yr by wheee!

Sent from my iPizzle ringy dingy device....

Very nice!

Service and price can't be beat... done in 20 minutes and about $25....

Make sure you strip them to bare metal first. A pain for those that have already finished their body work but it ensures a clean and accurate louver.