1976 280Z Restoration Project

[Mark Maras]

All original is nice but I like an upgraded, (which could include stripped down), personalized Z as long as the changes are done well.

[wheee!]

I agree. This is going to be a driver so it needs to functional, practical & fun!

[rcb280z]

5 hours ago, Mark Maras said:

All original is nice but I like an upgraded, (which could include stripped down), personalized Z as long as the changes are done well.

^^Agree^^. That's why I'm working on a stock 77 hood now for my Z. Hate this hood now. 

[rcb280z]

Plus I need to re-install the original grill bringing the marker lights back up to the stock location.

[rcb280z]

Ah hell, maybe I should just start over and rebuild from the ground up.

Wheee!, keep up the good work. Can't wait to see the new door panels. I can use a set for my 77.

[wheee!]

Thanks for the support guys!

[EuroDat]

I went with the 240Z turing lights because I wanted the 240Z air-dam. The 280Z air-dam has a much bigger gap under the bumper (a difference of about 50mm).

All the mods I have done so far are reversable. Not that Lm planning on going back, but I like to have the option.

[wheee!]

Some progress bashing metal today! My son in law is a B pressure welder and is helping me out!

[wheee!]

Prepped the frame supports for welding into place for support. The rails were cleaned and sprayed with Eastwood Frame Sealant

[wheee!]

Continued on with the fitting...

[wheee!]

Next is the cutting and the butt welding etc. Notice the panel is all held in with cleco clips for quick removal!

[Patcon]

Looks great!