Jump to content
We Need Your Help! ×

IGNORED

1976 280Z Restoration Project


wheee!

Recommended Posts

Heading into my Christmas leave block with the military, so time to get serious! I will be working on the remaining original panels and doors, getting them down to bare steel and ready for repairs. After that I have some work to do on the front clip, prepping the old bumper shock mounts (where the rotisserie was mounted) for primer and installing the gas shock mod for the hood! Looking forward to having the front end done and all the panels ready for primer for the new year. Then let the blocking and bodywork begin!

  • Like 4
Link to comment
Share on other sites

Should be a bit more “throaty” for sure. I haven’t heard Jim’s engine before but it was always carbureted as well. He will have to be the final judge! @zKars

I will have a bit of porting to do on the factory intake that I polished a year or so ago...

 

Edited by wheee!
Link to comment
Share on other sites

Cleaned up the front bumper shock mount areas a bit. Prepping for the gas shock hood mod.

IMG_8458.JPG.10423a9835460d43dcdccaa265082b5f.JPG

 

Sandblasted the old lifts

IMG_8459.JPG.c220ea92feb64b3bd8aa6f27bea6c33d.JPG

 

All the parts needed

IMG_8463.JPG.67558376f4931d798b6229ab1383618b.JPG

 

Cut off the screw mounts on the ball heads and position for welding

IMG_8464.JPG.0002fe50844b1126c06f719a6a72d38e.JPG

 

Comparison of the uncut head with the cut threads version

IMG_8465.JPG.4779ea7b5f0660dc5e821aa516bd83c1.JPG

 

The plan is to finish prepping the hinges, then position the lower bracket and weld it to the frame.

IMG_8466.JPG.8007f94feabe8b9646be3f46996d8c8b.JPG

 

 

 

Sent from my iPhone using Classic Zcar Club mobile

 

Link to comment
Share on other sites

Some test fitting shows the bracket will be up against the rad support wall so I trimmed the bracket down. The full range of motion will have the strut fully extended at open and fully closed at hood closed. Not a lot of extra room but this should work! I plan on leaving the torsion bar fittings on the hinges as a backup system. 

 

1C1309EC-E585-4409-942E-8A32F80CA540.thumb.jpeg.9845f07ae13cd2208b479299d20c1cbe.jpeg

D3F94136-5AEA-473D-A45A-5BA1DC9B381A.thumb.jpeg.a416a843d4fc83ee0b078334619f4c84.jpeg

D3C0533E-7164-436A-8AFE-7AD05FD3B134.thumb.jpeg.53dc052008ebd54aff02dcdd618df873.jpeg

0DFBBEDA-85A4-49B9-880C-5C44E91936EE.thumb.jpeg.cb340c0bf74958cdb6daccd88dce2756.jpeg

508CC1C7-5D94-4EF3-8BD1-B76D758B7E61.thumb.jpeg.a5106a95b47b0de9b9508fa63340a64d.jpeg

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.