wheee! Posted December 21, 2018 Author Share #2245 Posted December 21, 2018 My issue is that the shocks have just enough throw to open the hood 98% while still being able to fully close the hood. Moving the pivot points closer would not allow the hood to close due to the shocks being fully compressed and hindering full closure. Link to comment Share on other sites More sharing options...
Captain Obvious Posted December 21, 2018 Share #2246 Posted December 21, 2018 12 hours ago, wheee! said: I expect that the engine should use most of this new ‘area’ effectively! Sounds like a plan! Link to comment Share on other sites More sharing options...
wheee! Posted December 21, 2018 Author Share #2247 Posted December 21, 2018 So after a long morning of sandblasting and welding, the hinge mod is installed. I need to pencil grind the welds in the chassis and clean that up for paint etc, but overall I am very happy! and this last one is for Chas @EuroDat 1 1 Link to comment Share on other sites More sharing options...
Patcon Posted December 21, 2018 Share #2248 Posted December 21, 2018 I see you stole Darth Vader's lawn mower!! Link to comment Share on other sites More sharing options...
wheee! Posted December 21, 2018 Author Share #2249 Posted December 21, 2018 The salesman kept telling me this was not the tractor I was looking for.... 1 1 Link to comment Share on other sites More sharing options...
siteunseen Posted December 21, 2018 Share #2250 Posted December 21, 2018 (edited) I like the way you juxtaposed??? the swimming pool next to the snow plow. Edited December 21, 2018 by siteunseen 1 Link to comment Share on other sites More sharing options...
wheee! Posted December 21, 2018 Author Share #2251 Posted December 21, 2018 You mean the portable ice rink.... 1 Link to comment Share on other sites More sharing options...
EuroDat Posted December 22, 2018 Share #2252 Posted December 22, 2018 I was wondering when the tractor would show itself. LOL. What! No snow chains on the three wheeler? 1 Link to comment Share on other sites More sharing options...
wheee! Posted December 22, 2018 Author Share #2253 Posted December 22, 2018 That tractor has been heavily used since the first snows in September... Link to comment Share on other sites More sharing options...
wheee! Posted December 27, 2018 Author Share #2254 Posted December 27, 2018 A little work on the intake porting today... The porting is actually right on. The slight bright ring in the “down the throat” shot is reflection off the bevel into the intake. 2 Link to comment Share on other sites More sharing options...
siteunseen Posted December 27, 2018 Share #2255 Posted December 27, 2018 Looks good! That's the TB right? Will you do the same for the N42 intake? Link to comment Share on other sites More sharing options...
wheee! Posted December 27, 2018 Author Share #2256 Posted December 27, 2018 Looks good! That's the TB right? Will you do the same for the N42 intake?I ported the unwebbed N42 intake. The TWM throttle body is a 60mm throat already. Next up will be port matching the E88 head. Need a new intake exhaust gasket for that. Link to comment Share on other sites More sharing options...
Parman
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now