Jump to content
Remove Ads

Featured Replies



Remove Ads
Color is awesome, what is it?


Sent from my iPhone using Tapatalk

PPG water based E2335 British Racing Green. Very close to stock colour code 240 but more metallic and a bit lighter.
4 minutes ago, wheee! said:

Better fan pattern and air control. Plus I laid it down a lot thicker than the last time and still had no runs.

What was better? Thicker is good as long as your catalyst isn't too slow

What was better? Thicker is good as long as your catalyst isn't too slow

I mixed 4:1 as per the directions. I just laid a thicker pass than the last time I sprayed clear. Especially the final coat.

Did the inside edges of the drivers side fender tonight. Took three hours to sand, mask, clean and paint/clear just those edges... slow process.
But I think it came out very nice!

cabcb2b233e6d2cc0d8642c3da89b4fc.jpg

Is that a catalyzed paint (i.e. hardener mixed in)?

Water based. Once it air dries it is done. Not sure if there is any form of catalyst as there is no odour at all. Only use a mask for particles as there is no organic vapour risk.
The paint comes pre-mixed and requires nothing other than spraying. Then a regular catalyzed clear coat on top.

Create an account or sign in to comment

Remove Ads

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.