Jump to content
We Need Your Help! ×

IGNORED

1976 280Z Restoration Project


wheee!

Recommended Posts

17 hours ago, wheee! said:

The problem wasn’t just missing the contacts, the power and ground wires were in the wrong places and the IC fried in the controller. The wires that did connect were wrong as well. 
I have ordered a new kit to replace the entire harness. I will definitely check the connections before powering it up. 

Wel, doesn't that just suck big time. They wouldn't replace the harness en heater under warranty? Seems rude, since it was their bodgy assembly process that caused it.

Still a neat addition to the car.

Link to comment
Share on other sites

Wel, doesn't that just suck big time. They wouldn't replace the harness en heater under warranty? Seems rude, since it was their bodgy assembly process that caused it.
Still a neat addition to the car.

I have a habit of buying items well in advance of needing them. The seat heaters were bought off eBay about a year ago. No warranty or return was still possible. A risk you take, but overall I have saved money buying things this way. After 6 years of ownership and 5 years of restoration, I budgeted $500 Cdn a month for purchases, not including things like suspension and brakes etc that obviously went over budget. A good example of this is the seat covers I put in the car came from [mention]zKars [/mention] years ago and I just put them on this week! I have a shift knob I bought in 2014.... never been out of the package.
  • Like 2
Link to comment
Share on other sites

So after 6 hours of wiring and pin checking, I have a functioning set of flashers! Hazards and indicators work now! Amazing what a 75 harness connected to a 74 sub harness and a 76 flasher button Can do once you figure out all the wiring changes...

7D803A10-B9D4-4A2D-8C78-84D69B8CB7A1.jpeg

@zKars Here’s another one of those things that are similar yet not alike! Oh, and I found the fog light connections. They are on the 74 sub harness. Unfortunately, they do not pin out to the 75 harness and go nowhere. 

Link to comment
Share on other sites

Excited to receive the new supra 3.0 larger injectors today! Then disappointed to realize I forgot I will need new plugs for them and have to redo the fuel injection harness... ?

E5F2EEE9-15A7-4B19-907B-34419D4823A0.jpeg

22C37CDA-3C28-48CA-B5AE-4D2C48B67217.jpeg

FC3D5936-E8B2-47E9-920F-0401147D9448.jpeg

Edited by wheee!
Link to comment
Share on other sites

Sometimes good ideas create so much work! I am installing a Gentex Homelink mirror in the car and will probably run a radar detector too, sooo..... How hard could this be? Well, the channel for the mirror mount is double walled and tight tolerances to run five wires... separate fused hot leads, one for Homelink always on, two for accessory power and two ground leads. I used Cat 5 wiring in twisted pairs, one pair for each circuit and a common ground. Redundant wires to increase signal integrity and strength.

B06D9388-80CB-4F5E-93B0-BD0A09E4A408.jpeg

F4C0166B-04D8-4B1C-BABB-4B267F640FEE.jpeg

Edited by wheee!
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 461 Guests (See full list)

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.