Motorsports Auto - Interior Panels

[Sean240Z]

I just realized that MSA is selling replacement interior panels (perhaps they've been selling them for a while, but I never noticed). They're pricey, but I was wondering if anyone had ordered some and could comment on the quality of the parts? Also, if someone has ordered multiple panels, how consistent is the colour?

 

http://www.thezstore.com/page/TZS/PROD/classic08j08/40-3634

 

http://www.thezstore.com/store/merchant.mvc?Screen=PROD&Store_Code=TZS&Product_Code=40-3748

 

http://www.thezstore.com/store/merchant.mvc?Screen=PROD&Store_Code=TZS&Product_Code=40-3507

 

http://www.thezstore.com/store/merchant.mvc?Screen=PROD&Store_Code=TZS&Product_Code=40-3508

 

 

[Galaxybj]

I ordered all the panels for one of my 71 Z's and being black they were all the same.  My biggest issue was that I had to do a lot of edge trimming to get them to fit as they should, especially the pieces with the radio speaker holes.  There was a lot of excess material on the edges (some places at least 1/4")  Other than that they are very nice.

[Bonzi Lon]

My car only needed the tail finisher panel in off white.  When it came in it was black plastic on the back with 'SEM Vinyl Dye' in off white on the face, which matched the other panels I had used the SEM dye on.  However, like Galaxbj said, it needed trimmed around the edges to fit properly, then touch up with SEM.  The material was about twice as thick as the original 'all off white' plastic, which made getting the rivits in somewhat of a challange.

 

Bonzi Lon