Jump to content
We Need Your Help! ×

IGNORED

01/70 carpet replacement


Careless

Recommended Posts

I found a box in the pile-o-stuff with original diamond-pattern vinyl for the resto I'm undertaking, but the carpet I've been given looks pretty bad for a resto car. It would be sub-par for a street car that needs some form of carpet or another, but not ideal for a resto at all.

 

dying it with Rit won't save it, so I'm on the lookout for a 3rd party set... But after looking at 5 different websites, and from my passed experience with my Z31 300zx carpet purchase- I will say that I am weary of just buying any one of the items I've stumbled across.

 

Does anyone make a reproduction item that is as close to early 70's as possible? Or is it even possible to get NOS ones? looking for black carpet.

Link to comment
Share on other sites


Thanks for the recommendation, Jim.

 

Is the carpet a cut to fit style, or does it come with the edging/piping around the perimeter like the OE style carpet does? The photos of their product installations don't quite illustrate this point.

 

The carpet I do have here seeeeeeeeems ok, but its pile is a little flat in some areas. If I were to dye it, it would most likely come out looking like a new used part, but if the Seatz carpet does not have the edging, I guess that's something that has to be installed afterwards?

 

I wonder if purchasing the OE style carpet pile and then cutting it myself is an option. The ones I have here are not shriveled like some other examples I've dug out of some vehicles. I would just have to buy a bag of espresso for my friend's Nonna and she'll probably sew up the edging for me too. LOL j/k.

 

Has anyone ever attempted to recreate the carpet using the correct pile carpeting? I think my process would be (if I tried):

 

- buy large sheet of stiff cardboard.

- spray glue OE carpet to cardboard.

- gently/accurately cut the carpet shape out of the cardboard

- spray glue cardboard cutout to new pile

- gently/accurately cutout the new pile carpet shape

- edge-band the pieces

- put in new snap buttons in proper locations.

 

 

the only issue would be trying to find a food pad. This one is far beyond re-use.

 

 

I will email Seatz mfg for photos in the meantime.

Edited by Careless
Link to comment
Share on other sites

The carpet kit is fully finished and edge bound, no cutting or trimming required - the driver's side has a heel pad.  Firewall snaps are on the two front sections.  All pieces have padding glued to the underside.  Your post mentions pile, remember - the early cars had loop style not cut pile.

Link to comment
Share on other sites

The carpet kit is fully finished and edge bound, no cutting or trimming required - the driver's side has a heel pad.  Firewall snaps are on the two front sections.  All pieces have padding glued to the underside.  Your post mentions pile, remember - the early cars had loop style not cut pile.

 

Indeed, the carpet I have is a loop style- I used the incorrect term. Thanks for pointing that out- just incase anyone is looking for the proper carpet in the future that should save them some grief.

 

So by your assessment, Jim, I was wondering if you can answer a couple of simple Q's for me:

 

Is this a drop in replacement with virtually no fussing required?

How is the foot pad quality?

Are there only 5 pieces for the carpet in total? (2 rear pieces with small rectangle cut-outs, 2 floor mats, and cabin carpet).

I don't see a rear/hatch area carpet in my pile of stuff, I guess that's separate?

 

 

I emailed Seatz, and they just told me to ask their distributors instead. Not my idea of a company that wants to actually sell their product :-/

 

siteunseen, checking that site now, I wish these guys would have some photos of their product, I wouldn't have to ask so many questions! I'll email them for some photos. Thank you!

Link to comment
Share on other sites

Raff - Yes, its a std 5-piece kit: floorboards, behind seats, rear deck.  It is a drop-in as you suggest, the rear deck piece secures under the U-shaped plastic retainer just like OE.  The heel pad is about 6"X12", ribbed, sewn in - looks very good.  I saw your comment about their email response.  I sent a note this morning requesting retail contacts, will see what kind of response I get.

Jim

 

Follow-up response from Seatz on retail sources: MSA and Z Car Source.

Edited by jfa.series1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.