3D Radio Faceplate

[Chickenman]

I'm looking to install a Pioneer Single Din head unit in my 1976 280Z. Was going to make a template and custom cut an overlay Faceplate out of 1/8" Black ABS. Have some material that is pretty close to original console texture.

 

Then I had a thought about 3D printing. I'm wondering if any one has had a radio faceplate 3D printed for our cars, or can offer any suggestions on the best way to proceed.

 

Not interested in concealed radio installation etc. TIA.

[Kurbycar32]

3d printed objects don't really have the finish you need to look nice in your dash/console area.  It would in fact look better cut out of ABS.  The way 3d printed plastics are created using additive construction leaves waves in the material.

[rossiz]

kurby is right - while the printers can generate very complex geometry, they don't give you a nice smooth, consistent finish. cut it from solid or better yet, pull a mold and make one out of resin composite - that way you'll pick up the exact finish textures. you will of course have to paint it to match...

[Chickenman]

Thanks guys. I've only had the radio for a year and haven't gotten around to installing it yet. .

 

Mind you... the exhaust sounds so sweet, with the 10.1 CR, headers, 2.5" pipes and 280 degree cam, that I really don't mind much

[rossiz]

i hear you on that - my son is constantly asking why i "forget" to turn on the music, and i just smile, put my foot into it and say "sing along w/THAT!" guess i've been riding bikes too long, love the internal combustion soundtrack...

[Oiluj]

Newer 3D printers are capable of producing smooth finishes with some materials.  Finish on some samples I've seen were quite good.

Part strength is still not as good, but it's also improving.