say I get a pressure washer and or rotisserie

[inline4]

can a 510 fit on the rotisserie for a z easily if I have the engine, glass and doors, suspension removed?

how would you go about attacking the undercoat to remove it?

the floors will need to be cut out completely to weld new materials in, its pretty bad... so would you

clean the areas surrounding the floors, remove then cut?

or do something like oven cleaner then spray the whole underbody?

then after that, what would you suggest I do to keep the pans from rusting out again?

[Bambikiller240]

Originally posted by inline4

what would you suggest I do to keep the pans from rusting out again?

a pressure washer usually will remove most of the undercoat. I'd use a hair dryer and scraper to get the remaining chunks off, then wipe the area down with acetone to get the final tiny bits off.

Others will have different idea that will work just as good, but that's how I'd do it.

POR15 everything after it is solidly repaired/replaced http://www.thefinishedlook.com/main.htm

[beandip]

POR is a step process , follow the three steps and you are in good shape.