Seat sliders

[grannyknot]

Can anyone tell me if the seat sliders from a 280z are the same as the sliders from a 240-260z?

Thanks,

Chris

[Patcon]

I don't believe so, but someone else will have to verify. I recall having to swap some at one point because of bolting issues

[Namerow]

Different part numbers, FWIW.  Changeover was as of 7409.  Part number changed again in 7608.  Hard to say, though, whether the PN changes mean that the rails are/are not interchangeable.

[Captain Obvious]

Depends on the year of 280... 77/78 are different than previous years.

 

An easy way to tell the difference is that the 77/78 have an angled front mount and flat rear mount while all the previous years had flat mounts on all four corners. I believe the change occurred at the same time as the different doors. They changed a lot of sheet metal at that time and I believe it was all part of the same upgrade.

 

So I believe the bottom line is that you could use 280 mounts in your 240 or 260 as long as they are from 1975 or 76.

[grannyknot]

Thanks guys