Jump to content

Classic Zcar Community

Classic Zcar Community

The Classic Zcar Community Pride Performance Preservation

- Forums
- Clubs
- Leaderboard
- Guidelines
- Gallery
- Blogs
- Downloads
- Subscriptions
- Donations

Existing user? Sign In
Sign In

Email Address

Password

Remember me
Not recommended on shared computers

Forgot your password?
Sign Up

Classic Zcar Community

Classic Zcar Community

The Classic Zcar Community Pride Performance Preservation

Welcome Guest! Please read more information about our club!

correct suspension black

April 17, 20204 yr

comment_597350

6 hours ago, grannyknot said:

I missed the part you said what you are using, powder coat, paint?

Just paint. I am sandblasting most parts, and putting a quality primer on before painting with an enamel. As far as I can tell, there is not primer from the factory on any of the parts being discussed here: suspension, pedal box, steering column, heater box, motor mounts, transmission mounts, etc.

Link to comment

https://www.classiczcars.com/forums/topic/51964-correct-suspension-black/?&page=3#findComment-597350

Share on other sites

April 17, 20204 yr

comment_597370

4 hours ago, inline6 said:

As far as I can tell, there is not primer from the factory on any of the parts being discussed here: suspension, pedal box, steering column, heater box, motor mounts, transmission mounts, etc.

I agree, I have never found anything other than black paint on bare steel.

Link to comment

https://www.classiczcars.com/forums/topic/51964-correct-suspension-black/?&page=3#findComment-597370

Share on other sites

April 18, 20204 yr

comment_597425

Link to comment

https://www.classiczcars.com/forums/topic/51964-correct-suspension-black/?&page=3#findComment-597425

Share on other sites

Create an account or sign in to comment

Register a new account

Sign In Now

https://www.classiczcars.com/forums/topic/51964-correct-suspension-black/

Go to topic listing

Replies 26
Views 5.6k
Created 9 yr9 yr
Last Reply 4 yr4 yr

Top Posters In This Topic

Patcon 5 posts
siteunseen 5 posts
inline6 3 posts
240260280 2 posts

Popular Days

Most Popular Posts

CanTechZ

January 12, 20205 yr

Here is my replacement tank, just recently removed. It has quite a high gloss compared to the suspension components. Replaced in 1985 at 134,600 miles and now has 147,600 miles, so only about 13,000
HS30-H

April 17, 20204 yr

Given that many of the component parts on these cars were made by different companies and/or affiliates of Nissan and Nissan Shatai, I would not necessarily expect them all to have been painted with e
Patcon

July 27, 20159 yr

Site That's pretty glossy. Obviously glossier than the crossmember and dust shield. I will aim for the gloss finish I already have. That will prevent so much rework. Thanks Guys

Posted Images

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.