Jump to content

I am thinking about purchasing a complete stock system which has all its prebend tubes and does not rust.

 

I have seen many reviews and advised to purchase the following kit from MSA:

 

MSA Premium Exhaust System, 70-72, 74 240Z-260Z (For Stock Manifold)

 

http://www.thezstore.com/page/TZS/PROD/classic19j/15-6302

 

How sporty does this exhaust system sound? Looking for classic italian sport car sound!!

 

This is what i actually have in my car and plan on getting rid of!!! It was installed here in Panama.

 

post-28721-0-81428100-1444926403_thumb.j

post-28721-0-37619700-1444926420_thumb.j

post-28721-0-38583800-1444926444_thumb.j

Featured Replies

I have the MSA kit on my car, and I ended up adding a straight through muffler right after the header because it was too loud.

(But maybe I am just too old to appreciate the noise.) ;-)

Same here, I like the new sound better.  My neighbors like it even more.


I upgraded to the Abarth system after doing a rebuild on my engine.  It is a little pricey and NOS but you can still find the original 30 plus year old exhaust from a few suppliers.  It is a direct bolt that was manufactured in Europe, made exclusively in the 70's for the 240z's with enhanced modifications.

 

tn_gallery_29793_546_104972.jpg

 

 I have a few more pic's in my gallery.  It has that low rumble and sounds great.

I bought the complete Z store premium exhaust and their header, I'm not very happy with it.  First it didn't fit, I would say this thing was 3 inches too long to fit under the car so it sure wasn't "bolt on".  After trimming and fighting with it I got the pipes close enough to mostly fit under the car but its still not quite right.  The engine drone is horrendous and im young enough to still really like some loud exhaust.  On the high end the pipes sound great but I plan on driving this car.  In the end ill end up taking it to an exhaust shop anyway to get rid of the droning sound and fix the fitment

Do you have an audio of this? i wouldnt like to spend US$300 in something that first of all does not fit nice under the car and second is so loud i wont be able to listen to the radio. I use to have the twice pipe exhaust and it was quite annoying!

I really like my MSA system, 6 into 1 header then 2.5.  I enjoyed the loudness for a year or so but then I started driving it to work and having to leave out early in the mornings I was a little embarrassed.  I had a muffler shop put a resonator in and am happy as ever with the sound.  Cost $45. :)  

How was the fit for your guys?  No joke my system was so long the muffler wouldnt clear the rear body of the car until i trimmed a few inches off the pipe and re-flared the muffler slip on area.  Even now its probably an inch or two too long but i convinced it to go in.  I also have the MSA header so the extra length might be in that, but the complete kit didn't work for me.

The only issue I had was grinding some material off the transmission where the header was rubbing.  That was on my 280 though.  I haven't got to the 240 yet but I laid it all out like Jarvo did above and it looked to be identical to the stock exhaust.  I sure hope it fits like it's supposed to.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Who's Online (See full list)


Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.