sweatybetty Posted April 9, 2017 Author Share #253 Posted April 9, 2017 thats what the shipping label on the box says Link to comment Share on other sites More sharing options...
wheee! Posted April 9, 2017 Share #254 Posted April 9, 2017 They look nice! Link to comment Share on other sites More sharing options...
sweatybetty Posted April 11, 2017 Author Share #255 Posted April 11, 2017 rear glass tinted and installed. now i can move on to the interior since i can keep the dust out now with all the glass in. bunch of goodies from msa should be here tomorrow Link to comment Share on other sites More sharing options...
240260280 Posted April 11, 2017 Share #256 Posted April 11, 2017 Maybe the rotor cap is 180degrees off? Is it the right one? Link to comment Share on other sites More sharing options...
Jaymanbikes Posted April 11, 2017 Share #257 Posted April 11, 2017 On April 8, 2017 at 10:20 PM, sweatybetty said: from pakistan with love. ordered these seat covers from interior innovations last sunday. showed up today. my first impression is very good, but i will follow up when i get them installed. it is amazing to me that i can order a part, it gets delivered to my door from halfway around the world, nice quality, but it takes twice as long to get something from somewhere i can drive to in a day. I also ordered some seat covers and they came from Pakistan. I was amazed when they showed up in like 4-5 days. The ad on EBay said they would do different color stitching, the picture in the advertisement had gold. In the comment section I asked if I could get silver. I got no response so my expectations that they would come in w/silver stitching was very low but they did. I'm very happy with them! I also stitched in an inflatable lumbar "bag" that I purchased through MSA, I'm glad I did it! Link to comment Share on other sites More sharing options...
sweatybetty Posted April 15, 2017 Author Share #258 Posted April 15, 2017 (edited) not much going on, waiting on parts. got the rear glass tinted and installed, along with the stainless trim and rear spoiler. the spoiler was a bit of a challenge. the side that contacts the deck is not flat, so with only 2 mounting bolts, it would rock back and forth. i solved that by applying a few dime sized spots of body seam-sealer and actually glued the spoiler to the hatch. no movement at all now, and any water can flow out under the spoiler and hatch ordered a carpet kit from z specialties, and have a few more items coming from msa, then i should have everything for the interior. also got the speakers and amp from crutchfield yesterday. life is good i also found a distributor cap with brass terminals at napa Edited April 15, 2017 by sweatybetty Link to comment Share on other sites More sharing options...
240260280 Posted April 15, 2017 Share #259 Posted April 15, 2017 Your car will have a new car smell! Link to comment Share on other sites More sharing options...
grannyknot Posted April 15, 2017 Share #260 Posted April 15, 2017 Oooh you bought those new interior plastic panels, will be very interested to hear what you have to say about them, re fit and finish. Link to comment Share on other sites More sharing options...
sweatybetty Posted April 16, 2017 Author Share #261 Posted April 16, 2017 16 hours ago, grannyknot said: Oooh you bought those new interior plastic panels, will be very interested to hear what you have to say about them, re fit and finish. Granny, i test-fit a couple of them and they seem to fit well. i think i need the carpet kit in before installing the plastic. i will post as i get everything installed. Link to comment Share on other sites More sharing options...
sweatybetty Posted April 16, 2017 Author Share #262 Posted April 16, 2017 added a little "punch" yesterday. this is just the fitting and testing since i dont have carpet yet. sounds good so far, but i think it will sound even better with the entire interior in Link to comment Share on other sites More sharing options...
sweatybetty Posted April 22, 2017 Author Share #263 Posted April 22, 2017 On 4/10/2017 at 7:07 PM, 240260280 said: Maybe the rotor cap is 180degrees off? Is it the right one? i figured out the problem there. when i pulled the distributor apart to grease the centrifugal advance, i installed the part the rotor sits on 180* off. very easy to do Link to comment Share on other sites More sharing options...
sweatybetty Posted April 22, 2017 Author Share #264 Posted April 22, 2017 new plug wires (3rd set ) i like the routing better than over the valve cover. i made some brackets out of aluminum and used zip ties to hold the wires in place 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now