IDLE STOP SOLENOID FOR 240z

[jalexquijano]

Anyone knows of any generic idle stop solenoid that can be used to boost the RPMS when the compressor of the Air Conditioner is activated? I sent an e-mail to carb junkies but they told me their parts will not work with a Datsun 240z! Anyone?

[Stanley]

Sorry, not a real answer (low-tech me), but why not just find the minimum idle setting (by trial and error) that your AC system needs to work at idle, and set it at that ? Then if you don't plan to use AC for a while, it's easy enough lower the idle screws the same on both carbs, 1/4 to 1/8 turn or whatever.

[Chickenman]

George... this is the third thread you've started on the same subject. And you've already gotten a reply to this question.

 

http://www.classiczcars.com/topic/51811-servo-diaphgram-and-control-valve-for-ac-on-a-240z/#entry481823

Edited November 28, 2015 by Chickenman

[jalexquijano]

Sorry, not a real answer (low-tech me), but why not just find the minimum idle setting (by trial and error) that your AC system needs to work at idle, and set it at that ? Then if you don't plan to use AC for a while, it's easy enough lower the idle screws the same on both carbs, 1/4 to 1/8 turn or whatever.

 

I know about this but i still want to get an electrical solenoid to raise the idle when the ac compressor is on! Any recommendations?