Spray bar mounting.

Light film of black RTV?

Make gaskets out of gasket material?

Bolt it on bare?

I'll use loctite on the bolts.

Thank you for any direction on this.

Cliff

I made gaskets since that is what Datsun did when new.

Gaskets here too. (Cereal box) Use a paper punch for the holes. Either should work as long as it is sealed.

Gaskets here too. (Cereal box) Use a paper punch for the holes. Either should work as long as it is sealed.

A paper punch?  That's a good idea.

 

Both holes the same size punched into squares of gasket paper that match the size of the spray bar, about 1"x1".

 

Thanks guys, I have a plan!