AFM Connector Clip

[TomoHawk]

The clip holding the connector onto  the AFM on my '78 rusted and broke off, so I need to get some replacements- 2 or 3.  I have it  on temporarily;  it's a good snug connection and I have the cable secured to the sheetmetal.  Is there a good source of the clips, besides a replacement connector kit ($20)?  Maybe there is a compatible source from another car that you will find at the JY?  I wanted to take the connector off every couple years to clean and check the terminals.

[Darrel]

Audi and or saab. Just check the number of pins.

[TomoHawk]

Thanks.  Mine has 7 holes, but only  5 or 6terminals are installed.  The FSM shows 5 connections. I should get the whole cable probably, huh? 

 

[Darrel]

7 pin connector, get as much of the wiring as you can in case the wires on the z are corroded further up the insulation.