Posted April 11, 20168 yr comment_492370 Guys one of my cylinders has a leak at the fitting because I had to drill out the old one and retap it. What are the real differences in early to later because the replacements are well over $100 where later units are much less. They look exactly the same. Edited April 11, 20168 yr by SurferD Link to comment https://www.classiczcars.com/forums/topic/55250-rear-brake-cylinders-on-70-72-compared-to-73-74/ Share on other sites More sharing options...
April 11, 20168 yr comment_492373 The short hardline connection on the cylinder is in a different location. You have to bend that to get it to work. It's not too hard, I did mine. I finally found a picture, not so good but you'll get the idea. Also I found it was easier for to swap those short hardlines from one side to the other, not as drastic of a bend and less bending. Link to comment https://www.classiczcars.com/forums/topic/55250-rear-brake-cylinders-on-70-72-compared-to-73-74/#findComment-492373 Share on other sites More sharing options...
Create an account or sign in to comment