1971 HLS30-14938 "Lily" build

[240260280]

FYI I put new 4 piston Sumitomo calipers from Napa on Blue a month ago with no interference.  Did you get yours sorted?

[Patcon]

18 minutes ago, 240260280 said:

FYI I put new 4 piston Sumitomo calipers from Napa on Blue a month ago with no interference.  Did you get yours sorted?

No I haven't. What did you buy?

[240260280]

https://www.napaonline.com/en/p/SEBSE1372

[Patcon]

@240260280 Thanks for the link. What was the application? I couldn't find it on the page

[240260280]

It is a 1985 Toyota "Pickup"

 

 

[Patcon]

1 hour ago, 240260280 said:

It is a 1985 Toyota "Pickup"

 

 

what did you do about the core charge?

[240260280]

I gave them the ones from blue (below) that were rusted with stuck pistons.  I think most shops don't care if the cores are an exact match.

The brembo rotors survived the 12 year sleep very well.

 

Edited July 29, 2018 by 240260280

[Patcon]

1 hour ago, 240260280 said:

The brembo rotors survived the 12 year sleep very well.

That's good!

Were the ears milled like in post #215? Is that the same caliper? Mine are S12+8's too. I will have to look for the other stampings and relief milling you have too

[Diseazd]

Charles.....Xmas is coming up soon.....these are an easy install.

[Patcon]

22 minutes ago, Diseazd said:

Charles.....Xmas is coming up soon.....these are an easy install.

You're bad!! I love those thick vented rotors though

[wheee!]

Wheee! approves!

[Patcon]

Ok so tinkered with the brakes some more. Really frustrating!!!

So the rear calipers won't go on over the rotors I have. The rotors are too large. I am pretty sure I ordered the right ones (82-83 280ZX rears) to work with the 85-86 maxima rear calipers. The ones I have a re 84-85 300ZX rears. I have had them for years so if anyone needs them let me know. They are CTEK 121.42021 drilled

On the front the Power stops or Stop Tech ( I can't locate the box) have this number on the edge of the rotor. Doesn't lead any where in Google...

The hat height is the wrong height.

Here is a stock front disc against the new disc. There is about 0.27" difference in height. That looks like enough to make the calipers work on the front

So I ordered some discs today from Rockauto. Fortunately they were on sale. I don't know how to cross reference the front disc to figure out what they actually are