Posted June 9, 20168 yr comment_496584 For all those with the original style paper/cardboard glove box insert (left image) in their 240z, I found a cheap and easy way to upgrade to a plastic insert from a later 280z (right image). I picked my used 280z insert up for $10 on ebay a while back. Here is the picture of what I started with. A huge cut in the back of my cardboard insert from the prior owner. Its only gotten bigger since I've owned the car Old and new side by side. The 280z plastic insert will need to be trimmed to fit. There are various approaches, I chose to trim just the bottom tab and the made a new hole for the glove box door arm The finished product is much nicer than what I had in there originally. I did need to mount the glove box door first and then slide the new insert in. I also put screws into these front holes to hold it better. I probably could have trimmed down the side tabs as well and use the original holes, but this seemed like a much more secure way of mounting the insert. I will probably look to finish the bottom edge better and possibly heat the plastic to shape it better. This post has been promoted to an article Link to comment https://www.classiczcars.com/forums/topic/55602-240z-glove-box-insert-upgrade/ Share on other sites More sharing options...
June 9, 20168 yr comment_496586 Moving this to the technical articles area. Thanks for sharing! Link to comment https://www.classiczcars.com/forums/topic/55602-240z-glove-box-insert-upgrade/#findComment-496586 Share on other sites More sharing options...
June 16, 20168 yr Vendor comment_496998 That is an awesome upgrade! I was actually thinking about something like this so I'm going to try it as well. My original glove box crumbled when I was removing it. Link to comment https://www.classiczcars.com/forums/topic/55602-240z-glove-box-insert-upgrade/#findComment-496998 Share on other sites More sharing options...
June 17, 20168 yr comment_497001 Speaking of the origional glove box insert. Mine has been removed so long I cannot remember if it gets reinstalled from the front or the back. How did yours come out? Front or rear? Link to comment https://www.classiczcars.com/forums/topic/55602-240z-glove-box-insert-upgrade/#findComment-497001 Share on other sites More sharing options...
June 17, 20168 yr Author comment_497004 I pulled my original cardboard out from the front, same for inserting the new Sent from my iPhone using Classic Zcar Club Link to comment https://www.classiczcars.com/forums/topic/55602-240z-glove-box-insert-upgrade/#findComment-497004 Share on other sites More sharing options...
Create an account or sign in to comment