chiefmd Posted July 1, 2016 Share #1 Posted July 1, 2016 Just picked up a 1973 240z, great shape but I need to fix a few minor issues. The hazard switch shaft and knob have come out of the flasher assembly. Is there anyway to reinstall the shaft or does the complete assembly need to be replaced? I did remove the switch from the dash but no matter how hard I try the shaft will not stay in. There are two flat spots on the shaft which I assume should lock into something. Does anyone have any experience with this. Thanks Link to comment Share on other sites More sharing options...
SteveJ Posted July 1, 2016 Share #2 Posted July 1, 2016 Show photos of the current condition of the hazard switch. Link to comment Share on other sites More sharing options...
zKars Posted July 1, 2016 Share #3 Posted July 1, 2016 The shaft does not normally come out of the switch body. Since you have it out, pry open the case tabs and have a look see inside. Chances are you will need a new switch but you never know. I'm not close, but I can send you a switch if you get to that point. Link to comment Share on other sites More sharing options...
SteveJ Posted July 1, 2016 Share #4 Posted July 1, 2016 31 minutes ago, zKars said: The shaft does not normally come out of the switch body. Since you have it out, pry open the case tabs and have a look see inside. Chances are you will need a new switch but you never know. I'm not close, but I can send you a switch if you get to that point. Do you have a spare 73 hazard switch? That was a one-year only switch. Link to comment Share on other sites More sharing options...
zKars Posted July 1, 2016 Share #5 Posted July 1, 2016 Yeah, at least one. Maybe two..... Link to comment Share on other sites More sharing options...
chiefmd Posted July 1, 2016 Author Share #6 Posted July 1, 2016 Managed to get the shaft back in. PO must have really pulled on it. Thanks Link to comment Share on other sites More sharing options...
zKars Posted July 1, 2016 Share #7 Posted July 1, 2016 Fantastic! Way happier to hear it's fixed then you have to spend thousands to buy mine! (that's a joke son, relax....) I'd pull that shaft real carefull from now on.. Wait, maybe I should rephase that.... 1 Link to comment Share on other sites More sharing options...
zKars Posted July 1, 2016 Share #8 Posted July 1, 2016 1 hour ago, SteveJ said: Do you have a spare 73 hazard switch? That was a one-year only switch. Need one Steve'O? Now that Chief Doc has his fixed, I can spare ya one. Link to comment Share on other sites More sharing options...
SteveJ Posted July 1, 2016 Share #9 Posted July 1, 2016 Thanks for the offer. Fortunately, I bought a spare 10 or 11 years ago when a Z dismantler in Albuquerque was closing up shop. I was just making sure you were offering a 73 hazard switch since it is unique to that year. I'd hate for you to send a switch to him only to find out that it won't work. Save it for the next person who needs one. Link to comment Share on other sites More sharing options...
Yarb
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now