I need these parts for a 71 (2/71 ... series 2) just in case you have them … ash tray, heater lever button, vent knob, and hatch piston (that holds the hatch open

Edited July 14, 20168 yr by Tomcat

Hatch strut - http://jdm-car-parts.com/products/rear-hatch-shock-for-datsun-240z-260z-280z

The pulls for the door locks may still be available from Nissan. 

I'm not sure if these would work on your heater controls: https://zcardepot.com/interior/dashboard-parts/heater-control-knob-set-knobs-3-oem.html?search=heater&page=2

 

8 hours ago, SteveJ said:

Hatch strut - http://jdm-car-parts.com/products/rear-hatch-shock-for-datsun-240z-260z-280z

 

im curious. is that for a single strut, or the dual strut hatch?

6 hours ago, sweatybetty said:

im curious. is that for a single strut, or the dual strut hatch?

Can you answer that, @esprist?

Ashtray lid and Heater control knobs available at http://www.240zrubberparts.com .

6 hours ago, Namerow said:

Ashtray lid and Heater control knobs available at http://www.240zrubberparts.com .

Thank you on the heater control knob. I have the lid but the tray itself is broken ... the area of the pivot pin on the right side that the lid mounts to. There is also a spring for the lid I do not have.

My ashtray suffered from exactly the same problem (design flaw).  I rebuilt it and the results came out quite well.  If you're unable to find a replacement unit and you're interested in giving it a try, let me know and I'll post some pictures of the rebuild.
 

On 7/16/2016 at 8:11 AM, Namerow said:

My ashtray suffered from exactly the same problem (design flaw).  I rebuilt it and the results came out quite well.  If you're unable to find a replacement unit and you're interested in giving it a try, let me know and I'll post some pictures of the rebuild.
 

The ones I have found are so expensive that I would like to see if your repair is something I can make work for me.

5 hours ago, Tomcat said:

The ones I have found are so expensive that I would like to see if your repair is something I can make work for me.

Give me a day or two to pull some pictures together.