Here it is, I have a 73 240 that was originally going to be a parts car, until I decided to expirement with building a turbo rally Z. I want to swap in an L28ET from a 280ZX.

So assuming that I have all the hardware:

L28ET complete w/ P54 block and turbo head with turbo and downpipe. Complete engine room harness, and accesories.

Do I need to get the in-dash harness from the ZXT?

Can I do all the wiring under the hood including building a box for the ECU and all additional wiring?

I have no problem with straight wiring lights, and ignition to toggle switches inside the car, anything to avoid doing ZX electronics.

If anyone has detailed swap information, links to, or pictures of completed or in process swaps feel free to e-mail, respond to this post please. It would be most helpful.

Thanks.

-Dave

You might want to check out www.hybridz.org and search the archives of zcar.com. There are lots of guys in both places that have done a similar swap, although the guys on zcar.com seem to be quite hostile when a question comes up again that has been asked once before.

I was thinking of doing this swap myself eventually, just keeping my eye out for a good donor for the right price.

Andrew