siteunseen Posted June 6, 2017 Share #1 Posted June 6, 2017 I've deleted the coolant line that runs through the intake manifolds on my 240. Now I'm UN- bypassing my heater core for defrost function to work properly. The "T" that connects the hoses under the spark plugs that feeds those two components, heater core and intakes outflow to the radiator will now only flow coolant from the heater core's outlet. Would this cause any problems? Should I run a straight hose from the outlet of the heater core to the radiator's outlet to the water pump? Confusing to me so any opinion right or wrong could help me to figure this out. Thanks for any help! Link to comment Share on other sites More sharing options...
sweatybetty Posted June 7, 2017 Share #2 Posted June 7, 2017 site, i ran the hose from the head to the heater core, and then from the heater core straight back to the fitting at the water pump. no problems so far. 1 Link to comment Share on other sites More sharing options...
siteunseen Posted June 7, 2017 Author Share #3 Posted June 7, 2017 Thank you SwettyBetty, I'm gonna try the OE setup first then go for other ways like your's and Captain Fantastic's as options. I think my core is good and okay but I do like the idea of the valve in the bay. So if all else farts out that's what I'll do. Thanks again for your help. Cliff Link to comment Share on other sites More sharing options...
Yarb
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now