September 25, 20177 yr comment_530965 Pffffft. Who needs that 260 guy @SteveJ. I got this one. Those metal pieces are the spring loaded fingers that go between the HVAC control head and the metal bracket below it. Remember those two weird looking shoulder screws that go in from the underside? About a half inch long? Those fingers slip onto the bracket before those screws go in. The weird screws go through the holes in those weird brackets. The HVAC controls aren't hard mounted, but sorta "float" on those springs instead. No idea why they did that. Manufacturing tolerance stackup maybe? Link to comment https://www.classiczcars.com/forums/topic/58410-heater-valve-copper-thermostat-wire-do-i-have-to-remove-the-dash/?&page=2#findComment-530965 Share on other sites More sharing options...
September 25, 20177 yr Author comment_530971 1 hour ago, Captain Obvious said: Pffffft. Who needs that 260 guy @SteveJ. I got this one. Those metal pieces are the spring loaded fingers that go between the HVAC control head and the metal bracket below it. Remember those two weird looking shoulder screws that go in from the underside? About a half inch long? Those fingers slip onto the bracket before those screws go in. The weird screws go through the holes in those weird brackets. The HVAC controls aren't hard mounted, but sorta "float" on those springs instead. No idea why they did that. Manufacturing tolerance stackup maybe? Thank you! I was ready to put back the instrument panel and I felt bad having to leave out those parts. ?? Howard Edited September 25, 20177 yr by 882993md Link to comment https://www.classiczcars.com/forums/topic/58410-heater-valve-copper-thermostat-wire-do-i-have-to-remove-the-dash/?&page=2#findComment-530971 Share on other sites More sharing options...
September 25, 20177 yr comment_530979 8 hours ago, Captain Obvious said: Pffffft. Who needs that 260 guy @SteveJ. I've been asking that for years. Link to comment https://www.classiczcars.com/forums/topic/58410-heater-valve-copper-thermostat-wire-do-i-have-to-remove-the-dash/?&page=2#findComment-530979 Share on other sites More sharing options...
September 25, 20177 yr comment_530982 Haha!! Well clearly the answer is we need you around to answer the really tough questions! We can handle the easy ones. Link to comment https://www.classiczcars.com/forums/topic/58410-heater-valve-copper-thermostat-wire-do-i-have-to-remove-the-dash/?&page=2#findComment-530982 Share on other sites More sharing options...
September 25, 20177 yr comment_530984 Any question is easy if you already know the answer. Link to comment https://www.classiczcars.com/forums/topic/58410-heater-valve-copper-thermostat-wire-do-i-have-to-remove-the-dash/?&page=2#findComment-530984 Share on other sites More sharing options...
January 4, 20187 yr comment_538954 Is there someone in San Jose who would be willing to do this repair on my '77 Z? My heater valve needs restoration too. No winter driving because of it... :-( Link to comment https://www.classiczcars.com/forums/topic/58410-heater-valve-copper-thermostat-wire-do-i-have-to-remove-the-dash/?&page=2#findComment-538954 Share on other sites More sharing options...
January 4, 20187 yr comment_538998 I think it may be easier to adapt a manual valve than replace the Automatic one. Pretty sure there is a write up somewhere on Hybrid-Z about that. The copper capillary Tube? 10 seconds with a pair of side cutters and it's Gonzo!! Link to comment https://www.classiczcars.com/forums/topic/58410-heater-valve-copper-thermostat-wire-do-i-have-to-remove-the-dash/?&page=2#findComment-538998 Share on other sites More sharing options...
January 7, 20187 yr comment_539187 Next time this guy is the best for most Z car modifications http://www.zspecialties.comSent from my iPhone using Classic Zcar Club mobile Link to comment https://www.classiczcars.com/forums/topic/58410-heater-valve-copper-thermostat-wire-do-i-have-to-remove-the-dash/?&page=2#findComment-539187 Share on other sites More sharing options...
Create an account or sign in to comment